Students > Setting Channel on Keypad
Setting the Channel on your ResponseCard Keypad
Every room using these radio frequency clickers on campus has a
channel assigned to it. There should be a sign posted in the room
designating the channel for the room. You need to make sure your
keypad has been set to the channel of the room for it to register in
the class. To change the channel on the keypad:
Step 1:
Press the GO button on the keypad.
Step 2:
The light will
blink red/green
Step 3:
Enter the 2 digit
channel code. (ie. channel 4 = 04 and channel 23 = 23)
Step 4:
Press the GO button on the keypad.
Step 5:
The light should change to solid green for a few
seconds to indicate that the channel has been set correctly. |
